Understanding the 2017 Nissan Murano oil capacity is essential for maintaining the performance and longevity of this luxurious crossover. The vehicle's 3.5-liter V6 engine requires a precise amount of lubricant to ensure optimal operation, and adhering to the manufacturer's specifications is critical for preventing wear and tear.
2017 Murano Engine Specifications
The heart of the 2017 model year Murano is a robust 3.5-liter direct-injection V6 engine, producing 260 horsepower and 240 lb-ft of torque. This powerplant is mated to a continuously variable transmission (CVT), which requires specific fluid types and capacities to function correctly. Ensuring the correct oil volume is vital for the seamless delivery of power and efficiency.
Primary Oil Capacity
For the standard 2017 Nissan Murano, the total oil capacity is approximately 5.0 quarts. This figure represents the amount of lubricant needed to fill the engine from a cold start to the proper operating level. Always verify this specification in the owner's manual, as variations can occur based on specific production batches or regional requirements.
Oil Filter Considerations
The capacity listed refers to the oil remaining in the engine block and passages. The oil filter itself holds a residual amount of fluid that is not included in this total. When performing a complete oil change, replacing the filter is mandatory, and the new filter will require an additional portion of oil to prime it correctly.
Recommended Oil Type
Nissan specifies the use of 0W-20 synthetic motor oil for this engine. This low-viscosity formula is designed to provide superior protection, improve fuel economy, and ensure quick circulation during cold starts. Using a heavier grade oil can negatively impact the CVT and overall engine performance.
The Oil Change Process
When draining the old fluid, it is common to leave a small amount in the oil pan and filter. After installing the new filter, you will add roughly 4.5 to 4.75 quarts of fresh oil to the engine. The final half-quart is added incrementally while checking the dipstick to avoid overfilling, which can lead to increased pressure and potential damage.
Maintenance Best Practices
Regularly checking the oil level is just as important as knowing the total capacity. Owners should check the dipstick monthly, ensuring the vehicle is on level ground and the engine is off. If the level is low, adding small amounts of the recommended 0W-20 oil until reaching the correct mark helps maintain optimal lubrication without risking overfill.
Following the schedule for oil changes, typically every 5,000 to 7,500 miles for severe service or up to 10,000 miles with full synthetic oil, will keep the engine in peak condition. Adhering to the correct 2017 Nissan Murano oil capacity ensures the vehicle delivers the refined driving experience it is known for.
